|
1916-1923, Model G, set of 3
1924-1926, Model G-A, set of 3
Starter and generator - Victory, Standard, DA
|
|
Contact us about
pricing and
availability
|
|
|
North East 6 Volt Starter
|
|
Commutator end Plate.
This is the part that holds the brushes at the
end of the starter. Original "Pot metal" plate is
most always cracked. This new one is made of
manganese aluminum and much stronger.
#17060
|
|
|
|
Brush Holder.
This is the part that holds each individual
brush. 2 Required #17063
|
|
|
|
Center bearing plate.
This is the part that keeps the bendix drive
from hitting the armature. Original "Pot metal"
plate almost always breaks when dissasembling
the starter. This new one is made of manganese
aluminum and much stronger. #17062A
|
|
|
|
S-20900 Starter Switch.
Fits Victory, Standard and DA. If your starter
has two 1/4-20 tapped holes next to the copper
contact post on top of the starter, this is the
proper type of switch. Made of manganese
aluminum. #S20900
|
|
|
|
North East 12V Starter Generator
|
|
Starter/Generator drive gear.
For G and GA. This gear should be changed
when you replace the starter chain. A worn
gear can ruin a good drive chain. #12873
|
|
|
|
Starter chain.
Specify 82 link (#10416) or 84 link (#24362)
when ordering.
|
|
|
